OpenBCM V1.07b12 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
MM1CQO > 9600     08.10.04 11:32l 32 Lines 816 Bytes #999 (0) @ WW
BID : 8E0023MM1CQO
Read: GUEST
Subj: Motorola GM350 9k6 use???
Path: DB0FHN<DB0MRW<OK0PPL<DB0RES<ON0AR<IW8PGT<IZ0AWG<IK1ZNW<GB7CRV<GB7FUR<
      GB7IOM<GB7SAN<GB7EDN
Sent: 041007/1527Z @:GB7EDN.#77.GBR.EU #:3862 [LIVINGSTON] FBB7.00g25
From: MM1CQO@GB7EDN.#77.GBR.EU
To  : 9600@WW


HI

Has anyone got any experience of using Motorola GM2350 radios for 9600baud
use?

Acording to http://www.batlabs.com/gm350.html the 16 pin connector uses:

PIN 5
    Flat TX Audio. This input is for injecting signals into the transmit path
that should not be filtered, e.g. the output of a modem. The nominal input
level is 150 mVRMS for 60% deviation. The impedence is greater than 25 kohms.

and 

PIN 11
    RX Audio Discriminator. The signal routed to this pin is controlled by
ASFIC and gives continuous discriminator audio. For discriminator audio, the
normal output level is 330 mVRMS for 60% deviation. The impedence is 600 ohms.

From my limited knowledge of radios for 9k6 use it sounds like it is possible.

Any thoughts?

Many thanks

Jon
MM1CQO@GB7EDN


Read previous mail | Read next mail


 30.11.2020 17:28:53lGo back Go up