OpenBCM V1.07b12 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
PA2SNK > XNET     27.01.16 23:32l 359 Lines 7127 Bytes #999 (0) @ WW
BID : 3768_PA2SNK
Read: DK3UZ GUEST DG8NGN DG4MFN
Subj: Xnet + agw with Xglue.
Path: DB0FHN<DB0PM<OE5XBL<F1OYP<IW8PGT<IW7BFZ<I3XTY<I0OJJ<GB7CIP<GB7YEW<
      PI8CDR<PI8SNK
Sent: 160127/2001Z 9611@PI8SNK.#FRL.NLD.EURO [SNEEK/SNITS] FBB7.01.35 alpha
From: PA2SNK@PI8SNK.#FRL.NLD.EURO
To  : XNET@WW



# Generated by: TstHWin v2.21b - Registered to PA2SNK SNEEK
# On : 27-1-2016 17:15:16
# UTC: 27-1-2016 16:15:16

The following was written by a cb packet station.
This is a bit old bit stil works.
It should also work with soundmodem but i have not tested it.

73 Danny

=======================================================


                        Xnet + Agw with XGlue

                      v0.10 => 09 Januari, 2003

                          Richard => CB1RAM

                         http://www.cb1ram.tk

                     translated by Martin UR8MGB

========================================================


  Index :


  1. The files in this zip file

  2. How it works

  3. Websites where you can download the software

  4. Configuration for AGW

  5. Configuration for XGlue

  6. Configuration for (X)net

  7. How to start everything

  8. Check if it works

  9. Thanks to


--------------------------------------------------------


  Everything is configurated that I should work on a
  single pc.

--------------------------------------------------------

  1. The files in this zip file


   AUTOEXEC.BAT   <=>  (X)net configuration
   CB1RAM.EXE     <=>  Demo CB1RAM
   CB1RAM.TXT     <=>  Infomation CB1RAM
   CB1RAM.URL     <=>  Internet URL CB1RAM
   README.TXT     <=>  This help file
   XGLUE.INI      <=>  Xglue configuration


--------------------------------------------------------


  2. How it works :


   Xnet <--AXUDP--> XGlue <--TCPIP--> AGWPE


--------------------------------------------------------


  3. Websites where you can download the software


   AGWPE:
   http://www.elcom.gr/sv2agw/

   XGlue:
   http://www.qsl.net/lu7did/

   (X)net:
   http://www.qsl.net/dl1gji


--------------------------------------------------------


  4. Configuration for AGW :


   I assume that you have installed AGW Packet Engine on your pc.

   Start AGW, and a icon appears beneath in the window near the clock.
   Click with a right mouseclick on that icon and go to Setup Interfaces.

   Configuration :

   "Enable Winsock TCP/IP Application Interface"
   Put "TCP on "8000"
   Click on "OK"

   Now you have to make a loopback port in AGW.

   Click again on the AGW icon next the clock, choose for "Properties"
   and click on "New Port". A new configuration window appears,
   and the next step is to search under "Select Your TNC Model" for
   LoopBack Port. If you have selected this one, click Ok.

   Restart AGW and now you have configurated succesfully a loopback port.


--------------------------------------------------------


  5. Configuration for XGlue :


   I assume that you have installed XGlue on your pc.

   Put XGLUE.INI (included in this zip file) in the directory of
   XGLUE.EXE (Could be C:\Program Files\XGlue\)

   This is the configuration in XGLUE.INI :


[XGLUE]

LOGFILE=XGLUE.LOG
TRACE=2
RECOVER=FALSE
DUAL=NOT

[AGW]
ADDRESS=127.0.0.1
PORT=8000
LOGIN=
PASSW=

[XNET]
HOST=
ADDRESS=127.0.0.1

[XNET.PORT]
1=1,9300,93
2=2,9400,94


--------------------------------------------------------


  6. Configuration of (X)net :


   I assume that you have installed (X)net on your pc.

   Put the file AUTOEXEC.NET (included in this zip file) in the
   directory of XNET (where you can find NTNET.EXE too)

   You have to change the callsign, alias of the node, the names
   of the ports!

   This is the configuration of XNET in AUTOEXEC.NET :


;
;
;                   ================================
;                   = AUTOEXEC.NET voor Xnet v1.32 =
;                   ================================
;
;
; ===============
; [ START FILES ]
; ===============
;
;
; =[ Start Master-Blink ]=
;
start blinkd 200
;
; =[ Start Beacon ]=
;
start beacond
;
; =[ Start IP-Router ]=
;
start routed
;
; =[ Start Convers ]=
;
start conversd CB8RAM-1
;
; =[ Start Callcheck]=
;
start callchkd
;
; =[ Start Port-Daemon ]=
;
start statd 86400 00_00.sta
;
; =[ Start Portstatistic-Daemon ]=
;
start postatd
;
; =[ Start Cron-Daemon ]=
;
start crond
;
; =[ Start Convers 32500 Linkholder ]=
;
start xgate xg_32500.net
;
; =[ Start saving of POSTMORT.TXT into ]=
; =[ the Box after a reset/restart     ]=
;
start xgate xg_reset.net
;
;start rstatd xx.xx.xx.xx xx.xx.xx.xx
;
;
; ===========================================
; [ CONFIG. of running background prozesses ]
; ===========================================
;
;
; =[ Config Beacon ]=
;
beacon a 660 1 ID text CB8RAM:HBMNOD - JO23RE - (X)net v1.32 + Xglue v1.3 onder Agw v2002.1120
beacon a 660 2 ID text CB8RAM:HBMNOD - JO23RE - (X)net v1.32 + Xglue v1.3 onder Agw v2002.1120
;
ROUTER LOCAL 1 CB8RAM nd HBMNOD
ROUTER LOCAL 2 CB8RAM nd HBMNOD
;
att ip1 axudp 1 1 l93 d9300 127.0.0.1
att ip2 axudp 2 1 l94 d9400 127.0.0.1
;
MY CALL CB8RAM
MY ALIAS HBMNOD
MY DEFPORT 1
MY PROMPT (X)net v%V =>
MY TCALL CB2RAM
;
start ether 127.0.0.1
;
;
; =[ Instellingen voor poort 1 ]=
;
po 1 name Channel 33
po 1 baud 1200
po 1 dup 1
po 1 win 7
po 1 persistence 32
po 1 quality 255
po 1 retries 15
po 1 maxframe 2
po 1 paclen 200
po 1 tncdelay 50
;
;
; =[ Instellingen voor poort 2 ]=
;
po 2 name Internal Port
po 2 baud 19200
po 2 dup 1
po 2 win 7
po 2 persistence 64
po 2 quality 255
po 2 retries 15
po 2 maxframe 7
po 2 paclen 255
po 2 tncdelay 50
;
start crond
;
;


--------------------------------------------------------


   7. How to start everything :


   AGW => Xglue => (X)net => WinPack , TstHWin or another
                             terminal that operates with AGW.


--------------------------------------------------------


  8. Check if it works :


   If everything is alright you can see a 'X' near the clock.
   and that 'X' has to be green. When it has the red color
   then something is wrong and something must be wrong configurated.

   Now you go to (X)net.

   Type in the following :

   Press "Escape" and a * appears

   Then type C 2:CB1RAM

   You should see this * C 2:CB1RAM

   Put in the place of CB1RAM your own callsign.

   When everything is ok (X)net connects the packet terminal
   (could be TsthWin or WinPack)

   If this is happening then everything should be ok and should
   work now. Now you have a node running with AGW Packet Engine,
   and on the same time you could run other packet programs
   easily too, like WinPack, TsthWin or UI-View32.


--------------------------------------------------------


  9. Thanks to :


   Wim NL1WTS , without this guy this wouldn't be possible
                Thanks Wim.



        -=[ (c) 2003 by Richard CB1RAM and Wim NL1WTS ]=-
           -=[ (c) 2004 translated by Martin UR8MGB]=-



                                о     о
                                о     о
                               ооо   ооо
                              оооо   оооо
                            оооооо   оооооо
                             оо  ооооо  оо
                             о    ооо    о
                           ооооооо   ооооооо
                         оооооооо     оооооооо
                                              
                   PA2SNK te Sneek/Snits (Friesland)


Read previous mail | Read next mail


 02.12.2020 00:55:38lGo back Go up